A fast wireless router also has superior crack network blocking ability, aiming at all kinds of blocking routes around the country (such as network pioneers, star speed, trade winds, etc.) the fastest to provide upgrade software, share network resources, not subject to operator restrictions. Enter 192.168 1.1 login in the browser and log in to the router. You can select the encryption option in the radio parameters on the left. You need to use the factory provided router original account number and password (usually: admin); enter the router page, enter the broadband account and password provided by the telecommunications department and perform IP settings and wireless password settings.
Set the connection type to PPPoE in the network parameters, enter the account number and password, and the connection mode is usually automatic connection, save the point. Select Enabled in DHCP, other to keep the default, this is the dynamic allocation of IP, otherwise, You need to set the IP. Save it.
- OK, don’t forget to restart the router for the configuration to take effect.
- Fast wireless router settings graphics tutorial:
- First, the physical connection of the device
The wired computer is connected to the router’s LAN port, and the external network cable is connected to the router’s WAN port. The wireless connection is set up through the router and then connected to the router through the wireless function.
Second, establish the correct network settings
2.1 Set the computer’s IP address. Right-click on “My Network Places” – “Properties” (below)
Set the IP address to “192.168.1.152, Subnet Mask 255.255.255.0, Default Gateway 192.168.1.1”
2.2 Test Order Check whether your computer and router are connected. Click “Start” – “Run” – “Enter CMD” Click OK. Enter ping 192.168.1.1 in the open CMD window. The result is shown below. The description is close to the router.
Third, set the router
Open IE browser input router address: http://192.168.1.1, you will see the login interface shown below. You need to log in as the system administrator, that is, enter the user name and password in the login interface (the factory settings for the user name and password are both admin), and then click the OK button.
If the user name and password are correct, the browser will display the administrator mode screen, and a setup wizard page will pop up as shown below (if it does not pop up automatically, you can activate it by clicking the setup wizard menu on the left of the administrator mode screen).
The main screen after logging in to the router can be manually set by clicking on the setup wizard
Click Next to enter the Internet access mode selection screen. Here we show how PPPOE dial-up Internet access is used by general home users. Based on your actual situation.
In the following interface, enter the username and password for the broadband Internet access provided by your ISP. Telecom Internet Account Password (as told by their staff).
After the settings are completed, click Next and you will see the basic wireless network parameter settings page as shown below.
Set a wireless internet password, this is your own mobile phone or other wireless device wifi password.
After the settings are completed, click Next. If you change the wireless settings, the setup wizard will pop up as shown in the following figure. Click Restart to make the wireless settings take effect.
If you do not change the wireless settings, the setup wizard will pop up as shown in the following figure. Click Finish to complete the setup wizard.
One thing to note here is that the channel bandwidth settings mentioned above are only for network devices that support the IEEE 802.11n protocol. For devices that do not support the IEEE 802.11n protocol, this setting does not take effect.
Wireless status: Enable or disable the wireless function of the router.
SSID: Set an arbitrary string to indicate your wireless network. (Mark this wifi is your home)
WPA-PSK/WPA2-PSK: The encryption mode of your router’s wireless network. If you select this option, please enter the password you want to set in the PSK password. The password requires 64 hexadecimal characters or 8-63 ASCII characters. Code character. (other people often ask for your wifi password)
Do not modify wireless security settings: Select this option to keep the parameters you last set in the wireless security options. If you have never changed your wireless security settings, selecting this option will leave the factory default settings to turn off wireless security.